Rainwater grates

Rainwater grates
(1) The direction of the flat steel is the load-bearing (supporting) direction, and the length L of the flat steel is determined by leaving a gap according to the width of the ditch (well).
(2) Arrange according to the groove length, take a standard board width of 995mm that meets the processing module, and leave a gap of 5mm between the boards.
(3) The remaining part of the ditch (well) with a length of less than 1 meter shall be determined based on the model number.
(4) Select the type of steel grating plate based on the width of the ditch (well) and the bearing requirements.
(5) It is recommended to choose standard sizes for design and construction, and various sizes or functions can be designed and manufactured according to user requirements. 1. Ordinary rainwater grates: steel grating.
2. Pipe type rainwater grate: It is a steel grating wrapped with steel pipes.
3. U-shaped rainwater grate: It is a steel grating wrapped with angle steel edges.
4. Anti theft rainwater grate: It is to place the angle steel frame in reinforced concrete and then place the steel grating into the angle steel frame.
5. It is usually recommended to use anti-theft rainwater grates